If you have details about a boat you would like to see featured please email me.

We are seeking contributing authors to join us and post on a regular basis - see details scroll down the right hand column

Sunday, 22 July 2012

The Columbia 43: a classic Tripp racer

The Columbia 43 is a big, muscular boat made for long ocean races. The boat is largely forgotten now because its birth coincided with the death of the rating rule it was designed to race under.

With a long, flush deck and a low gun-turret house, the boat is easily recognizable as coming from the drafting board of William H. Tripp, Jr., one of the great designers of the Cruising Club of America racing era. Trip designed the Columbia 43 as part of a suite of racing and cruising boats for Columbia Yachts that included two of the largest production boats of the 1960s, the Columbia 50 and the Columbia 57. In fact, the first model of the Columbia 43 had a Columbia 50's deck house.
Columbia 43 hull number 1 with the deck house off a Columbia 50.
The Columbia 43 is a fast boat. In its early years, a 43 finished first-in-class in the Transpac race from San Pedro, Calif., to Honolulu, Hawaii. As the International Offshore Rating rule took over the racing scene, the Columbia 43 was left behind in favor of boats that would rate better under the new rule. With the popularity of sailboat racing under PHRF, the Columbia 43 is again a contender for the silver.

A Mark III recognizable by her small rectangular ports.
Columbia also came out with a Mark III model that was even more competitive as a racer. It had a keel with a shorter chord and lead ballast, a modified rudder, and six additional feet of mast height. Columbia also abandoned it's trademark long, low window on the side of the house for this model and substituted two, rectangular ports on each side giving it a mean, pillbox look.

Tripp's name is synonymous with CCA racers that have centerboards, so, naturally, there is a centerboard version of the boat as well. It has an additional 1,300 pounds of ballast and a minimum draft two feet less than the keel version.

The boat was well laid out for racing with a galley to port and a U-shaped dinette to starboard, a step down takes you to the main saloon with facing settees that convert to four single bunks. Forward of that is a small head to starboard with a large standing chart table and a V-birth in the forepeak, The arrangement is somewhat less desirable as a cruising boat for a couple, but it is still workable. The boat also carried 50 gallons of fuel and 50 gallons of water, about half of what you would want on a cruising boat that size.

Columbia built 153 of the 43s: about a third at its yard in Portsmouth, Va., and the rest in the Costa Mesa, Calif., yard. A smaller number (about six) of the Mark IIIs were built. The longevity of heavy fiberglass construction means most are still sailing.

At least one Columbia 43 has circumnavigated the globe. Other boats ended up scattered across the world in the Mediterranean,Caribbean and the islands of the Pacific as well as in every coastal state. A 43 in Aruba takes out 22 passengers for day sails; a job it's done every day for more than 30 years under two generations of owners. The large deck and 10-foot cockpit comfortably handles all 22 passengers. A tough boat indeed.
Columbia 43 under sail on the Columbia River.
Here's the Columbia 43 by the numbers:
  • Length: 43 feet 3 inches
  • Beam: 12 feet 4 inches
  • Draft: 6 feet 11 inches
  • Waterline Length: 32 feet 8 inches
  • Displacement: 22,200 pounds (one source says 18,900 pounds)
  • Ballast: 9,500 pounds
  • Sail Area: 806 square feet
  • Sail Area/Displacement: 18.24
  • Ballast/Displacement: 50.26 percent
  • Displacement/Length: 257.49
  • Theoretical Hull Speed: 7.5 knots 
  • Vertical Clearance: 58 feet 4 inches
  • Built between 1969 and 1974
  • Number built: 153
  • PHRF number: 102 (Columbia 43 Mark III has a PHRF number of 96)

Thursday, 5 July 2012

Bill Tripp's fast and beautiful boats

Dancer is a Tripp-designed, 55-foot flush deck aluminum cutter built in 1965 by Abeking & Rasmussen.
Copyright by Brandon Ford, 2016.

Dear reader, I posted a profile of Bill Tripp Jr. a couple of years ago here. Since then I've learned so much more about this great designer that I decided to repeal and replace the original post. Hope you enjoy the update.

In the last two decades of the Cruising Club of America (CCA) rating rule, William H. Tripp Jr. became known for winning and weatherly sailboats, including the Columbia 43.

He also designed, what many sailors and yacht designers consider, some of the most beautiful boats ever built in fiberglass. They continue to captivate sailors and command high prices in the used boat market today. In 2014 Cruising World Magazine's readers and editors chose Tripp's Columbia 50 and Hinkley Bermuda 40 as two of the "40 Best Sailboats Ever Made."

The Hinkley Bermuda 40, designed by Tripp, had the longest production run in U.S. history. She is as seaworthy as she is beautiful.
Tripp was a self-taught designer who came up through the ranks working for other designers. He worked with Phil Rhodes and then Sparkman & Stevens before hanging out his own shingle.

His designs were informed by many years of racing Star-class sailboats and other sailboats while growing up. The seaworthiness of his designs owes something to his experience serving in the Coast Guard during World War II. Trip was assigned to the Offshore Patrol out of Greenport, Long Island.

"This very special branch of the service created some enduring legends ...with its all-weather, all-season operations on the lookout for subs approaching our shores in the early days of the war," wrote Bill Robinson in The Great American Yacht Designers.* "With conventional antisubmarine vessels in short supply, sailing yachts were used as lookout posts.... There was no better school for finding out how the hull of a sailing vessel acts in a sea, and Bill found the firsthand encounter a valuable experience."
The Mercer 44 is one of Tripp's most enduring classics even though only 14 were built.

Tripp was a prolific designer. In addition to providing custom racing and cruising designs for many clients, he designed production boats for Seafarer, Hinckley, Pearson, Columbia and others. An early advocate of fiberglass, he became known for flush-deck race boats with his distinctive gun-turret dog houses.

As a teenager in the 1960s, Seattle-based yacht designer Bob Perry considered Tripp his favorite designer. "Tripp’s boats had a very distinctive look, with proud sweeping spoon bows, bold sheer springs, long concave counters terminating in almost vertical transoms, and sexy and svelte cabin trunks," Perry wrote in the November/December 2011 issue of Good Old Boat Magazine.** "You would never mistake a Tripp design for an S&S design. They just seemed to my young eye to have a strength and boldness, kind of an 'in your face' quality. Plus, his boats were consistent race winners."

Burgoo, the Tripp-designed Pearson 37-foot Invicta centerboard yawl, won the Bermuda race in 1964. At that time it was the smallest fiberglass boat to ever win the race. "[I]t had all the Tripp trademark design features and it was a very sexy-looking little boat," Perry wrote. "In fact, and I could be wrong, this may be the first Tripp design to have the “gun turret” cabin trunk."
Ondine, a 57-foot aluminum yawl designed by Tripp, is arguably the most successful racing yacht in history. 
In the same race, the Class A winner was another Tripp design, Ondine, a 57-foot aluminum yawl built in 1960 and owned by Sumner A "Huey" Long. Ondine was one of the most successful racing yachts in history, according to Robinson. "With her wide beam and low center of gravity, she was designed for great sail-carrying ability and passage performance and became one of the most successful yachts in history in this respect, under an owner eager to campaign her in all oceans of the world.... she placed on the prize list of over 60 percent of the contests she entered and garnered many top trophies," Robinson wrote.

"Bill was the first to put portlights in the topsides as well as opening ports in cockpit sides to improve air circulation and communication below," said Ted Jones,*** who worked with Tripp before becoming a boating magazine editor. "He popularized flush decks on small boats (Galaxy, Medalist, Invicta, Mercer 44), and set high standards in hull and rigging scantlings that have been proven over time. He designed boats to stay together under the most difficult circumstances. I cannot recall one of his designs ever being dismasted or suffering structural damage at sea."

Columbia President Dick Valdes and designer
 Bill Tripp look at plans circa 1965.
By the mid-1960s, Columbia, America's leading builder of fiberglass yachts at the time, approached Tripp to design a fifty footer. He produced a true classic in the Columbia 50. When the Columbia 50 was built in 1965 it was the largest production fiberglass boat ever built by a large margin. It was the first and maybe the best loved of the Columbia boats Tripp designed.

In the next six years, he produced thirteen Columbia yachts, including the Columbia 26 MkII, Columbia 34, Columbia 39, Columbia 43, Columbia 45, Columbia 50, and the Columbia 57. The boats are vintage Tripp, but with the innovation of fin keels and spade rudders.

The C-50 attracted a strong following and still has an active owners association. For years they raced as a one-design class in California, in addition to racing in handicap events. "The Columbia 50 was a big elegant-looking boat with the same bubble house and long flush deck (of many other Tripp designs)," Perry wrote. "It was a very good-looking boat and it was fast. Seattle’s racing scene was dominated for years by a Columbia 50 called Six Pack while the smallest class was dominated by a Columbia 26 called Miller’s High Life."
Grundoon, a Columbia 50, in the 2012 Newport-Bermuda Race.
In 1969, Columbia was the world's largest fiberglass sailboat manufacturer and Tripp designed a 57 footer, which became the largest production fiberglass boat. It displayed several of Tripp's trademark features: an unusually-long and effective waterline, high-aspect ratio sail plan, dual-surface steering system with a keel-mounted trim tab as well as a balanced spade rudder aft. Speed was derived partially from an absolute minimum of wetted surface area, and from the high prismatic coefficient hull design.
Encore, a Columbia 43, on her way to winning her class in Transpac. She was eighth overall in the fleet that year.
In the same year, Columbia came out with the 43, which was an immediate racing success. Columbia wanted a great race boat when it commissioned Tripp to design what became the Columbia 43. Specifically, the company bosses wanted a boat that could win the Transpac race, which starts in Long Beach, Calif., and ends in Honolulu, Hi. That's exactly what they got. In 1971, Encore, won her class in Transpac, and was eighth overall in the fleet.

The design also dominated other big yacht races, like in the Ocean Racing Class of the Newport to Ensenada Yacht Race. In 1970 it was the world's largest ocean race at the time with 539 boats competing. Blue Norther, Columbia 43 hull number seven, was the overall winner.

In 1971, the racing community adopted the International Offshore Rule (IOR). Tripp fought hard against the change, but designed a 30 and 52-foot IOR boat for Columbia and was looking forward to developing more of his ideas on the new rule. A few months later, a drunk driver lost control of his car, hurtled over the divider on the Connecticut Turnpike and smashed into Tripp's Jaguar, killing him instantly. He was 51.

Tripp's legacy endures in his beautiful boats - many of which are still sailing today. His son, William H. Tripp, III is also a yacht designer with many large and beautiful yachts to his credit, including an update of his dad's famous Bermuda 40. Hinkley commissioned Tripp III to design the Bermuda 50, which was launched in 2015.
The newest Hinkley sailboat is the Bermuda 50 designed by Bill Tripp III.
*The Great American Yacht Designers by Bill Robinson, Alfred A. Knopf, 1974
**The Legacy of Bill Tripp By Robert Perry, Good Old Boat Magazine, November/December 2011 pages 14-17
*** Bill Tripp's Boats by Ted Jones, Professional BoatBuilder, February/March 2007, pages 56 - 77